FAN BATHROOM WITH RELAY 100CFM 1.5 SONE

1.5 sones
100 CFM
Permanently lubricated motor, engineered for continuous operation
4” round duct connector
U.L Listed for use over bathtubs and showers (when connected to a GFCI
protected branch circuit)
Energy Star ® qualified
Housing Dimension: 7-5/8” x 10-3/8" x 11-1/4” - Fits 2" x 8"
construction
Grille : 12-7/8” x 13-3/4”
Sensaire(R) Technology detects rapid increases in moisture levels at the
ceiling, where stram and humidity naturally rise. Our humidity sensing fans turn
on and off automatically to help prevent comsmetic and structural problems
associated with excess moisture. It is a perfect solution for high-traffic
bathrooms,or a kid's bathroom.Humidity sensing fans are ideal for
anyone who leaves the house before humidity is properly vented. With a fan this
quiet, you can't forget to turn it off when the job is done; it turns off
automatically. That saves energy and money.
OPERATION
The humidity control and fan can be operated separately. Use a 1- or
2-function wall control. Do not use a dimmer switch to operate the humidity
control. See “Connect Wiring” for details.
SENSOR OPERATION
The humidity-sensing fan uses a sophisticated humidity sensor that responds
to: (a) rapid to moderate increases in humidity or (b) humidity above a
set-point. The humidity sensor may occasionally turn the fan ON when
environmental conditions change.
MANUAL ON WITH TIMED OFF
The humidity sensing fan has an additional operation feature. For odor or
vapor control, the fan can be energized by cycling the power switch. Once the
fan has been energized in this manner, it will remain on for 20 minutes. To
manually energize the fan:

Step 1 : If fan power switch is already ON, proceed to Step 2; otherwise,
turn power switch ON for more than 1 second.
Step 2 : Turn fan power switch OFF for less than 1 second.
Step 3 : Turn fan power switch back ON and fan will turn ON.